Align tabs
First, make sure the tabs on the conical screw head are seated in the slots in the miter clamp.
Tighten the knob
Next, with the Hedgehog out of the miter slot of your saw, tighten the knob A LOT which will loosen things up and flare out the miter clamp. Try that and see if it works better in the miter clamp.
Flare miter clamp
If that didn’t do the trick, please try this: disassemble the Hedgehog, insert a flat blade screwdriver into the slot in the miter clamp, and give it a little twist to flare out the miter clamp. It doesn’t take much so you might want to go small and sneak up on it. Re-assemble and see if that helps.
Still having problems?
If that didn’t work, please contact us.